72
Abstract Views
135
PDF Download
Articles

Analisis Sifat Mekanis Baja ST60 Setelah Mengalami Pack Carburizing Karbon Variasi Temperatur 700⁰, 800⁰, 850⁰, 900⁰

Pramuka Ilmu Purboputro Universitas Muhammadiyah Surakarta, Indonesia Correspondence [email protected]
Pages 17-23
Browse this journal

Abstract

Solid carburization can increase the hardness and wear resistance of steel compared to other methods. In this study, carburizing was carried out using temperatures of 700â°, 800â°, 850â°, 900â°. With this number of variations, the researcher will analyze the physical properties and mechanical properties of ST60 steel after undergoing carbon pack carburizing. In the Rockwell hardness test, the ASTM E 140-02 standard is used. In the Rockwell hardness test results, the hardness value of the raw material before pack carburizing increased after the material was carburized. Thus, the temperature in the carburizing process affects the hardness of the material. Then in the results of the raw material microstructure test, there are more ferrite crystals than pearlite. While the microstructure in pack carburizing has more pearlite crystals than ferrite. This shows that the steel workpiece has increased hardness after undergoing the carburizing process.

Keywords :

There is no Figure or data content available for this article

References

  • [1] J. B. Ooi, “Effects of graphite oxide and single-walled carbon nanotubes as diesel additives on the performance, combustion, and emission characteristics of a light-duty diesel engine,” Energy, vol. 161, pp. 70–80, 2018, doi: 10.1016/j.energy.2018.07.062.

    [2] C. Dal et al., “Production of curcumin-resveratrol cocrystal using cocrystallization with supercritical solvent,” J. Supercrit. Fluids, vol. 171, no. February, p. 105190, 2021, doi: 10.1016/j.supflu.2021.105190.

    [3] F. D’Souza and K. M. Kadish, Handbook of Carbon Nano Materials Vol. 1 Synthesis and Supramolecular Systems. 2011.

    [4] P. I. Purboputro et al., “The Effect of the Quenching and Tempering Process on Hardness Value and Medium Carbon Steel Microstructure with Variations in Holding Time of 10 Minutes, 30 Minutes, and 60 Minutes,” AIP Conf. Proc., vol. 2838, no. 1, 2024, doi: 10.1063/5.0180339.

    [5] N. Hu, Composites and, vol. 12, no. 2. 2006.

    [6] F. S. Baker, C. E. Miller, A. J. Repik, and E. D. Tolles, Carbon, Activated. 2003. doi: 10.1002/0471238961.0103200902011105.a01.pub2.

    [7] R. A. Hutchins, Activated carbon. 2018. doi: 10.1142/9789813221918_0005.

There is no Supplemental content for this article.

How to Cite This

Purboputro, P. I. (2025). Analisis Sifat Mekanis Baja ST60 Setelah Mengalami Pack Carburizing Karbon Variasi Temperatur 700⁰, 800⁰, 850⁰, 900⁰. Creative Research in Engineering (CERIE), 5(1), 17–23. https://doi.org/10.30595/cerie.v5i1.24185

Article Metrics

Download Statistics

Other Statistics

Verify authenticity via CrossMark
Copyright and permissions information is unavailable

Data Availability

All data generated during this study are included in this published article [and its supplementary information files].
 

statcounter

Statcounter

View Journal CERIE Stats

visitor

VISITOR

 Free counters!

Keywords