Implementasi Ganda Modul ESP32 untuk Kontrol Pintu Otomatis dengan Monitoring Realtime dan Autolock Terjadwal melalui Web dan Chatbot
DOI:
https://doi.org/10.30595/jrre.v7i1.24273Keywords:
IoT, ESP32, NTP Pool, RFID, Bot Telegram,Abstract
Perkembangan peralatan Smart home menggunakan teknologi web terus mengalami perkembangan pesat dengan ditandai banyak inovasi peralatan IoT (Internet of Things) baik rumah maupun industri. Peralatan tersebut dapat dimonitoring dari jarak jauh melalui jaringan internet. Penelitian ini bertujuan untuk menerapkan modul ESP32 sebagai perangkat IoT untuk buka pintu otomatis yang dimonitoring melalui web dan telegram yang menggantikan kunci konvensional yang lebih efisien memudahkan untuk pengguna untuk membuka maupun mengunci pintu yang dilengkapi Autolock system pada waktu tertentu dengan memanfaatkan time server NTP Pool. Penelitian tersebut menggunakan metode pengembangan sistem waterfall. Metode waterfall terdiri dari analisis, desain, implementasi, pengujian dan perbaikan sistem. Berdasarkan hasil pengujian menggunakan metode blackbox, sistem tersebut dapat dijalankan dengan baik sesuai yang diharapkan. Ada 7 sub pengujian dimana 6 sub pengujian berhasil dilakukan dengan persentase sebesar 86%. Sistem tersebut mampu menjalankan sensor RFID untuk mengidentifikasi tag RFID yang telah didaftarkan pada sistem untuk proses buka maupun mengunci pintu data informasi dari proses buka maupun mengunci pintu mampu terekam di dalam database web. Hasil pengujian pada Autolock System berhasil mengunci pintu pada waktu yang telah ditentukan. Selain itu, user menerima notifikasi dari bot telegram yang memberikan informasi Autolock System. Selain itu, penggunaan baterai pada perangkat tersebut dapat bertahan hingga 32,5 jam dan rata-rata latensi saat buka dan tutup pintu otomatis sebesar 16,3 detik tidak ada delay pada proses tersebut. Namun, pada pengiriman bot telegram masih diperlukan penelitian lebih lanjut.
References
[1] D. P. Caniago et al., Internet of Things (IoT): Inovasi, Implementasi, dan Masa Depan, 1st ed., vol. 1. Kab.Agam: YayasanTriEdukasiIlmiah, 2024.
[2] M. Fauza and M. A. Muthalib, “Sistem Pengaman Pintu Otomatis menggunakan Sensor Radio Frequency Identification (RFID) berbasis Arduino Uno,” JurnalEnergiElektrik, vol. 11, no. 1, pp. 30–37, 2022.
[3] F. Di. Silalahi, J. Dian, and N. D. Setiawan, “Implementasi Internet of Things (IoT) dalam Monitoring Suhu dan Kelembaban Ruang Produksi Obat Non Steril Menggunakan Arduino berbasis Web,” JurnalPenelitianIlmudanTeknologiKomputer, vol. 13, no. 2, pp. 62–68, Oct. 2021.
[4] D. I. Mulyana, A. Wulandari, F. N. Huda, R. F. Putra, and R. Wanandi, “Implementasi Sistem Keamanan RFID pada Lingkungan Rukun Warga 015 Tegal Alur Jakarta Barat,” JurnalPengabdianIndonesia, vol. 4, no. 1, pp. 230–237, Jan. 2023.
[5] O. M. Hassan, A. M. Fatahillah, D. M. Fahrezi, and B. A. Kaswwar, “Rancang bangun sistem Monitoring dan Manajemen bendungan berbasis IoT,” JurnalMediaElektrik, vol. 17, no. 3, pp. 112–116, 2020.
[6] N. M. Nizam, H. Yuana, and Z. Wulansari, “Mikrokontroler ESP32 sebagai alat monitoring pintu berbasis Web,” JurnalMahasiswaTeknikInformatika, vol. 6, no. 2, pp. 767–772, Oct. 2022.
[7] R. A. Wardana and A. S. Budi, “Pengembangan Sistem Monitoring Smarthome secara Pevasif dengan Nodemcu dan Smartphone,” JurnalPengembanganTeknologiInformasidanIlmuKomputer, vol. 5, no. 2, pp. 508–513, Jan. 2021.
[8] K. Wirawibawa, “Pemanfaatan RFID MFRC522 dan Sistem Database untuk Pemantauan Akses Ruangan dengan Identifikasi In dan Out,” JournalArticlePowerElektronik, vol. 11, no. 1, 2022.
[9] M. R. Thakur, “ESP32 DevKit ESP32 WROOM GPIO Pinout,” https://circuits4you.com.
[10] V. Ramdhani, R. Hidayat, and hendrick Hendrick, “Alat Keamanan Pintu Menggunakan E-KTP, Modul RFID dan AWS EC2 berbasis NODEMCU ESP8266,” JITSI:JurnalIlmiahTeknologiSistemInformasi, vol. 3, no. 1, Mar. 2022.
[11] Y. A. Surya, D. Irawan, and A. Rozaq, “Sistem Keamanan Rumah Menggunakan RFID dan Keypad Matrix dengan One Time Pad,” JurnalRisetRekayasaElektro, vol. 5, no. 1, pp. 47–56, Jun. 2023.
[12] A. Saravanos and M. X. Curinga, “Simulating the Software Development Lifecycle: The Waterfall Model,” Applied System Innovation, vol. 6, no. 6, Dec. 2023, doi: 10.3390/asi6060108.
[13] T. Aprilia and M. Achsin Samas, “Implementasi Software Requirement Spesification dan Waterfall Model pada SIPODANG berbasis Android,” 2024. [Online]. Available: http://ejournal.bsi.ac.id/ejurnal/index.php/ijse
[14] T. K. Rahayu, Susanto, and Suwarjono, “Application Report Process of Islamic School Based on Pesantren Boarding Using Waterfall Model,” in Journal of Physics: Conference Series, IOP Publishing Ltd, Jul. 2020. doi: 10.1088/1742-6596/1569/2/022025.
[15] H. J. Christanto and Y. A. Singgalen, “Analysis and Design of Student Guidance Information System through Software Development Life Cycle (SDLC) dan Waterfall Model,” Journal of Information Systems and Informatics, vol. 5, no. 1, pp. 259–270, Mar. 2023, doi: 10.51519/journalisi.v5i1.443.
[16] S. Herawati, Y. D. P. Negara, H. F. Febriansyah, and D. A. Fatah, “Application of the Waterfall Method on a Web-Based Job Training Management Information System at Trunojoyo University Madura,” in E3S Web of Conferences, EDP Sciences, Dec. 2021. doi: 10.1051/e3sconf/202132804026.
[17] F. A. Perdana, “Baterai Lithium,” InkuiriJurnalPendidikanIPA, vol. 9, no. 2, pp. 103–109, Aug. 2020.
[18] E. E. Group, “Lithium Battery Charging: The Definitive Guide,” ELBSpecialized In Providing Custom Lithium Battery Solutions.
[19] A. D. Mulyanto, “Pemanfaatan Bot Telegram untuk Media Informasi Penelitian,” JurnalIlmuKomputerdanTeknologiInformasi, vol. 12, no. 1, pp. 49–54, Mar. 2020.
[20] A. Wagyana, “Prototipe Modul Praktik untuk Pengembangan Aplikasi Internet of Things (IoT),” JurnalIlmiahSetrum:SistemKendaliTenagaElekronikaTelekomunikasiKomputer, vol. 8, no. 2, pp. 238–427, Dec. 2019.
[21] I. Academy, “Arduino IDE,” ProgrammingDasar.
[22] Y. Yusman, B. Bakhtiar, and U. Sari, “Rancang Bangun Sistem Smart Home dengan Arduino Uno R3 berbasis Internet of Things (IoT),” JurnalLitek:JurnalListrikTelekomunikasiElektronika, vol. 16, no. 1, pp. 25–29, 2019.
[23] S. M. Mutagbal, F. R. Firdaus, and H. Rahmadi, “Pengujian Aplikasi menggunakan Black Box Testing Boundary Value ANalysis (Studi Kasus: Aplikasi Prediksi Kelulusan SMNPTN),” JurnalIlmiahTeknologiInformasiTerapan, vol. 1, no. 3, pp. 31–36, Feb. 2016.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Riset Rekayasa Elektro

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Riset Rekayasa Elektro is licensed under a Creative Commons Attribution 4.0 International License.