Fire Alarm System Design Based on PLC Pi Pico at MCC XYZ Company

Authors

  • Gama Dhuhry Avreliyanda Muhammadiyah University Gresik
  • Rini Puji Astutik Muhammadiyah University Gresik

DOI:

https://doi.org/10.30595/jrre.v6i2.24652

Keywords:

Fire alarm system, PLC rapsberry pi pico, Mq2 sensor, Flame detector sensor, SCADA, MCC

Abstract

As is known, the development of technology today is much faster than in previous eras. Especially in the field of industrial automation systems. With the rapid development of technology, one of its functions is to facilitate human work with the existence of an automatic control system. MCC or known as the motor control center is equipment in industrial applications that is used to control motors centrally on a panel. This article describes the design and prototype method for a fire alarm system based on the PLC pi pico at the MCC XYZ company. The work process in this system is to monitor fires in the MCC room of the XYZ company, this system is controlled using the PLC Rapsberry pi pico. While SCADA (Supervisory Control and Data Acquisition) is used as a monitoring system with the MQ 2 sensor, Flame detector sensor, pushbutton as a temperature sensor and can also be accessed via the melsec protocol. The output is in the form of an alarm and a pump. The results of this study show that the tool works well and is able to help minimize fires in the area.

References

[1] H. Jurnal, A. Anggarani, And T. Feri Efendi, “Jurnal Riset Teknik Komputer (Jurtikom) Rancang Bangun Sistem Pendeteksi Kebakaran Dan Pemadam Api Otomatis Berbasis Internet Of Things (Iot),” Jurtikom, Vol. 1, No. 2, Pp. 97–111, 2024, [Online]. Available:

Https://Journal.Smartpublisher.Id/Index.Php/Jurtikom/Article/Download/112/133/614

[2] T. H. Siregar, S. P. Sutisna, G. E. Pramono, And M. M. Ibrahim, “Rancang Bangun Sistem Pendeteksi Kebakaran Berbasis Iot Menggunakan Arduino,” Ame (Aplikasi Mek. Dan Energi) J. Ilm. Tek. Mesin, Vol. 7, No. 2, P. 59, 2021, Doi: 10.32832/Ame.V7i2.5063.

[3] D. K. Prasetyo, M. Fauziyah, And S. Adhisuwignjo, “Jurnal+Dimas+Kohesi (1),” Vol. 2, No. 6, Pp. 71–80, 2024.

[4] K. Umaru, D. Joseph, And F. Tartisious, “Design And Implementation Of A Fire Detection, Alarm And Suppression System Using Programmable Logic Controller (Plc),” Int. J. Acad. Eng. Res., Vol. 7, No. 12, Pp. 20–29, 2023, [Online]. Available: Www.Ijeais.Org/Ijaer

[5] H. Darmawan, V. Yusiana, And H. Siregar, “Rancang Bangun Fire Alarm Dan Smoke Detector Berbasis Programmable Logic Controller (Plc) Tyfe Sr3b261bd,” J. Electr. Power Control Autom., Vol. 5, No. 2, P. 58, 2022, Doi: 10.33087/Jepca.V5i2.77.

[6] M. N. Fachry, H. S. Syah, And S. Sungkono, “Rancang Bangun Sistem Pemadam Kebakaran Berbasis Internet Of Things,” E-Link J. Tek. Elektro Dan Inform., Vol. 16, No. 2, P. 65, 2021, Doi: 10.30587/E-Link.V16i2.2956.

[7] N. N. Mahzan, N. I. M. Enzai, N. M. Zin, And K. S. S. K. M. Noh, “Design Of An Arduino-Based Home Fire Alarm System With Gsm Module,” J. Phys. Conf. Ser., Vol. 1019, No. 1, 2018, Doi: 10.1088/1742-6596/1019/1/012079.

[8] A. N. Y. Express Et Al., “Colophon”, [Online]. Available: Https://Datasheets.Raspberrypi.Com/Pico/Pico-Datasheet.Pdf

[9] Y. A. Desita, “Bab Ii Landasan Teori,” J. Chem. Inf. Model., Vol. 53, No. 9, Pp. 1689–1699, 2021, [Online]. Available: Https://Repository.Mercubuana.Ac.Id/84998/4/Bab 2.Pdf

[10] P. 47, “Mitsubishi Plc Software,” Plc247.Com. Accessed: Oct. 20, 2024. [Online]. Available: Https://Plc247.Com/Download-Gx-Works-2-V1-620w-Full-New-Version/

[11] Fec, “Relay Modules 1-Channel Features,” Futur. Electron. Corp., No. 5 V, Pp. 1–2, 2019, [Online]. Available: Http://Fecegypt.Com/Uploads/Datasheet/1522335719_Relay Module.Pdf

[12] L. Rri, “Dioda,” Kantor Pusat Lpp Rri. Accessed: Oct. 20, 2024. [Online]. Available: Https://Www.Rri.Co.Id/Iptek/832724/Alat-Elektronik-Dioda-Ini-Jenis-Dan-Fungsinya

[13] Pt. Canindo Daya Elektrika, “Haiwell Cloud Scada.” Accessed: Aug. 05, 2023. [Online]. Available: Www.Canindo-Cde.Co.Id

[14] R. Adolph, “Catu Daya,” Pp. 1–23, 2016, [Online]. Available:

Https://Digilib.Polban.Ac.Id/Files/Disk1/246/Jbptppolban-Gdl-Saepulmuly-12262-3-Bab2--2.Pdf

[15] Helen, “Rs485 Wiring, Communication And Difference With Rs232,” Shandong Renke Control Technology Co.,Ltd. Accessed: Dec. 21, 2023. [Online]. Available: Https://Www.Renkeer.Com/What-Is-Rs485/

[16] T. Data, “Mq-2 Semiconductor Sensor For Combustible Gas,” Pololu, P. 2, 2016, [Online]. Available: Https://Www.Pololu.Com/File/0j309/Mq2.Pdf

[17] Suprianto, “Pengertian Push Button Switch (Saklar Tombol Tekan),” Wordpress. Accessed: Oct. 20, 2024. [Online]. Available: Https://Blog.Unnes.Ac.Id/Antosupri/Pengertian-Push-Button-Switch-Saklar-Tombol-Tekan/

[18] P. Technical, “Ky-026 Flame-Sensor Module,” Pp. 118–124, 2017, [Online]. Available: Https://Moviltronics.Com/Wp-Content/Uploads/2019/10/Ky-026.Pdf

[19] W. K. Raharja And R. Ramadhon, “Purwarupa Alat Pendeteksi Kebakaran Jarak Jauh Menggunakan Platform Thinger.Io,” J. Elektro Luceat, Vol. 7, No. 2, Pp. 188–206, 2021.

[20] D. Sasmoko And A. Mahendra, “Rancang Bangun Sistem Pendeteksi Kebakaran Berbasis Iot Dan Sms Gateway Menggunakan Arduino,” Simetris J. Tek. Mesin, Elektro Dan Ilmu Komput., Vol. 8, No. 2, P. 469, 2017, Doi: 10.24176/Simet.V8i2.1316.

Downloads

Published

2024-12-20

How to Cite

Avreliyanda, G. D., & Astutik, R. P. (2024). Fire Alarm System Design Based on PLC Pi Pico at MCC XYZ Company. Jurnal Riset Rekayasa Elektro, 6(2), 145–154. https://doi.org/10.30595/jrre.v6i2.24652

Issue

Vol. 6 No. 2 (2024): JRRE VOL 6 NO 2 DESEMBER 2024

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Creative Commons License
Jurnal Riset Rekayasa Elektro is licensed under a Creative Commons Attribution 4.0 International License.