Analysis of The Reliability Index of The Platuk Feeder Distribution System at PT. PLN ULP Kenjeran with Section Technique Method

Authors

  • Reza Sarwo Widagdo Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia
  • Gatut Budiono Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia
  • Puji Slamet Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia
  • Muhammad Sultan Abdai Habibullah Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.30595/jrre.v6i2.22920

Keywords:

CAIDI, Reliability, SAIDI, SAIFI, Section Technique Method

Abstract

A high success rate is required to ensure the continuity of the supply of electricity, so that the distribution of electricity can maintain its availability continuously and have a reliable reliability value. Therefore, this study is intended to help evaluate the reliability of electric power distribution in plate feeders at PT. PLN ULP Kenjeran. The effect of failure on the system caused by equipment failure, as well as its impact on the load point will be evaluated using the section technique method. The results of the calculation show that the value of SAIFI is 2,699 times/year, SAIDI is 5.128 hours/year, and CAIDI is 1.9 hours/disturbance. Based on SPLN No. 68-2: 1986 concerning the reliability index, the value of SAIFI is 3.2 times/year, SAIDI is 21 hours/year, and CAIDI is 6.56 hours/disturbance, where the reliability index value can be categorized in accordance with SPLN standards and is considered reliable. Meanwhile, in the comparison of calculations between the section method and the method without sections, the reliability results were worse. Where the SAIFI value was 3.21112 times/disturbance (up 15.93%), the SAIDI value was 12.4056 hours/year (up 58.65%), and the CAIDI value was 3.9 hours/interruption (up 51.12%). Efforts to improve reliability by improving preventive maintenance and adding switching equipment such as LBS

Author Biographies

Reza Sarwo Widagdo, Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Gatut Budiono, Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Puji Slamet, Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Department of Electrical Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

References

[1] R. S. Widagdo and A. H. Andriawan, “Prediction of Age Loss on 160 KVA Transformer PT. PLN ULP Kenjeran Surabaya using The Linear Regression Method,” J. Ris. Rekayasa Elektro, vol. 5, no. 2, p. 83, 2023, doi: 10.30595/jrre.v5i2.18140.

[2] R. S. W. Widagdo and A. H. A. Andriawan, “Analysis of Losses Due to Load Unbalance in a 2000 kVA Transformer at Supermall Mansion 2 Tower Tanglin Surabaya,” J. Eng. Sci. Res., vol. 5, no. 2, pp. 78–84, 2023, doi: 10.23960/jesr.v5i2.144.

[3] R. S. Widagdo, P. Slamet, and M. Ubaidillah, “Prediction of Transformer Age Based on Temperature Due to Loading Using Linear Trend Method : Case Study of 60 MVA Transformer,” 2024.

[4] Gozali, S. Prasetyono, and R. Mufaizah, “Analisis Perbandingan Keandalan Sistem Jaringan Distribusi Berkonfigurasi Radial Dan Loop Menggunakan Metode Section Technique,” JASEE J. Appl. Sci. Electr. Eng., vol. 3, no. 02, pp. 12–26, 2022, doi: 10.31328/jasee.v3i02.113.

[5] R. Harahap, S. A. Siregar, S. Hardi, and S. HS, “Analisis Sistem Jaringan Distribusi 20 KV Penyulang SB.02 Pada PT. PLN (Persero) ULP Sibolga Kota Menggunakan Metode Section Technique dan Failure Mode Effect Analysis (FMEA),” J. Electr. Technol., vol. 7, no. 2, pp. 87–95, 2022.

[6] R. Maulana, Suardi, and S. R. Halid, “Analisa Sistem Keandalan Jaringan Distribusi Menggunakan Metode Section Technique,” J. Kitektro, vol. Vol. 6, no. No. 3, p. 2021, 2021.

[7] U. K. Luthfiyani, A. Setiawan, and S. Arifin, “INSOLOGI: Jurnal Sains dan Teknologi Analisis Perbandingan Indeks Keandalan Sistem Jaringan Distribusi dengan Metode Section Technique dan Reliability Index Assessment (RIA): Studi Kasus Gardu Induk Balaraja,” Media Cetak, vol. 2, no. 1, pp. 250–264, 2023, doi: 10.55123/insologi.v2i1.1782.

[8] U. Usman, I. Indra, M. Thahir, S. Sofyan, A. R. Idris, and S. Thaha, “Penentuan Keandalan Sistem Distribusi 20 KV Penyulang Malili dengan Metode Section Technique dan FMEA,” PROtek J. Ilm. Tek. Elektro, vol. 9, no. 2, p. 126, 2022, doi: 10.33387/protk.v9i2.4985.

[9] G. Sihombing, “Analisis Indeks Keandalan Secara Teknis Dan Ekonomis Jaringan Distribusi 20 Kv Dengan Menggunakan Metode Section Tehnique Pada Pt.Pln (Persero) Rayon Belawan,” E-Link J. Tek. Elektro dan Inform., vol. 17, no. 2, p. 55, 2022, doi: 10.30587/e-link.v17i2.4683.

[10] S. Samsurizal and Y. D. Fadli, “Relokasi Recloser Dengan Metode Section Technique Pada Jaringan Distribusi 20 kV,” Sutet, vol. 11, no. 1, pp. 13–24, 2021, doi: 10.33322/sutet.v11i1.1328.

[11] Y. F. Noufanda, P. Slamet, N. A. Basyarach, A. Ridhoi, and G. D. Prenata, “Keandalan sistem jaringan distribusi 20KV di PT. PLN Rayon Ploso Menggunakan Metode FMEA,” El Sains J. Elektro, vol. 3, no. 2, pp. 53–60, 2021, doi: 10.30996/elsains.v3i2.5990.

[12] M. U. Said, G. Budiono, and R. S. Widagdo, “Analisa Sistem Keandalan Distribusi Dengan Penambahan LBS Pada PT . PLN Rayon Kenjeran Menggunakan Metode Section Technique,” pp. 1393–1401, 2023.

[13] Hanif, M. R., & Suheta, T. (2020). Analisa Keandalan Sistem Distribusi 20kv di PT. PLN (Persero) Rayon Kudus Kota Menggunakan Metode Section Technique. SinarFe7, 3(1).

[14] Sihombing, G. (2022). Analisis Indeks Keandalan Secara Teknis Dan Ekonomis Jaringan Distribusi 20 kV Menggunakan Metode Section Tekhnique Pada PT. PLN (Persero) Rayon Belawan. Jurnal Edukasi Elektro, 6(2), 105-115.

[15] Koba, N., Suheta, T., Cahyono, W. D., & Putra, I. P. (2023, November). Analisa Keandalan Sistem Distribusi 20 KV di PT. PLN (Persero) ULP Bajawa. In Prosiding Seminar Nasional Sains dan Teknologi Terapan.

[16] P. Seminar, N. Nciet, and N. Conference, “Analisis Keandalan Menggunakan Metode Section Technique Pada Penyulang P6 Gardu Induk Petung Pt Pln (Persero) Area Balikpapan,” Pros. Semin. Nas. NCIET, vol. 1, no. 1, pp. 423–429, 2020, doi: 10.32497/nciet.v1i1.149.

[17] F. Haz, A. Mustopa, G. A. Setia, and D. Furqon, “Reliability Index Assessment-Section Technique pada Distribusi Listrik Penyulang Suci Menggunakan Software ETAP,” vol. 23, no. 01, pp. 61–74, 2024.

[18] M. Jooshaki, S. Karimi-Arpanahi, M. Lehtonen, R. J. Millar, and M. Fotuhi-Firuzabad, “Reliability-Oriented Electricity Distribution System Switch and Tie Line Optimization,” IEEE Access, vol. 8, pp. 130967–130978, 2020, doi: 10.1109/ACCESS.2020.3009827.

[19] M. C. W. Lestari and Y. Mulyadi, “Analysis of 20 kV Power Distribution System Reliability using the Section Technique,” IOP Conf. Ser. Mater. Sci. Eng., vol. 384, no. 1, 2018, doi: 10.1088/1757-899X/384/1/012035.

[20] Nazaruddin et al., “Reliability Analysis of 20 KV Electric Power Distribution System,” IOP Conf. Ser. Mater. Sci. Eng., vol. 854, no. 1, 2020, doi: 10.1088/1757-899X/854/1/012007.

[21] H. Suyono, R. N. Hasanah, W. A. Syahri, H. Mokhlis, M. T. Rahman, and R. Omar, “Power system distribution reliability enhancement of pujon feeder malang-indonesia case study using bat and cuckoo search algorithms,” EECCIS 2020 - 2020 10th Electr. Power, Electron. Commun. Control. Informatics Semin., pp. 87–92, 2020, doi: 10.1109/EECCIS49483.2020.9263439.

[22] R. Aprialdi and Z. Aini, “Analysis of the Reliability of Electrical Distribution Systems Using the Technical Section Method and Rnea Repeat Gibp-Mesir,” J. Edukasi Elektro, vol. 7, no. 2, pp. 133–145, 2023, doi: 10.21831/jee.v7i2.63118.

[23] N. R. Najib and Hamma, “Analysis of Feeder Reliability in a 20 kV Distribution Network System Using the Reliability Network Equivalent Approach (RNEA) Testing Method,” Indones. J. Adv. Res., vol. 2, no. 6, pp. 561–576, 2023, doi: 10.55927/ijar.v2i6.4424.

[24] A. Hasibuan, A. Bintoro, S. Salahuddin, and R. D. Meutia, “Reliability Distribution System on Load Break Switch Addition at PT. PLN (PERSERO) ULP Langsa City Using RIA-SECTION Technique Combined Method on ETAP 14.1.0,” Andalasian Int. J. Appl. Sci. Eng. Technol., vol. 2, no. 2, pp. 57–64, 2022, doi: 10.25077/aijaset.v2i2.42.

Downloads

Additional Files

Published

2024-12-20

How to Cite

Widagdo, R. S., Budiono, G., Slamet, P., & Habibullah, M. S. A. (2024). Analysis of The Reliability Index of The Platuk Feeder Distribution System at PT. PLN ULP Kenjeran with Section Technique Method. Jurnal Riset Rekayasa Elektro, 6(2), 121–132. https://doi.org/10.30595/jrre.v6i2.22920

Issue

Vol. 6 No. 2 (2024): JRRE VOL 6 NO 2 DESEMBER 2024

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Creative Commons License
Jurnal Riset Rekayasa Elektro is licensed under a Creative Commons Attribution 4.0 International License.