1. Home
  2. JUITA Vol. 9 No. 2, November 2021
  3. Gustriansyah

Performance Evaluation of Contract Employees Using the Best-Worst and Simple Additive Weighting Methods

Rendra Gustriansyah, Juhaini Alie, Nazori Suhandi

Abstract


All companies need qualified employees to ensure the continuity and progress of the company. Therefore, some companies are very selective in evaluating employee performance based on the criteria set by the company. However, because of the many criteria used in the assessment, a large number of contract employees to be evaluated, and the evaluation that must be proportional, the Human Resources department has difficulty evaluating the performance of contract employees. Therefore, this study aimed to develop a system for evaluating the performance of contract employees by integrating the Best-Worst (BW) and Simple Additive Weight (SAW) methods. The BW method is used to determine the weight of each criterion related to the performance appraisal of contract employees, and the SAW method is used to evaluate the performance of contract employees. The results showed that the system developed can provide a more proportional evaluation. So, this study contributes as a recommendation system for HR managers in determining eligible contract employees to have their work contracts extended based on criteria determined by the company.


Keywords


Best-Worst method, contract employees, performance evaluation, Simple Additive Weighting

References


[1] N. Smith, “Beyond Hiring and Firing: Human Resource Management?” medium.com, 2019. [Online]. Available: https://medium.com/. [Accessed: 28-Feb-2021].

[2] S. J. Sadjadi and M. Karimi, “Best-worst multi-criteria decision-making method: A robust approach,” Decis. Sci. Lett., vol. 7, no. 4, pp. 323–340, 2018.

[3] N. Suhandi, Terttiaavini, and R. Gustriansyah, “Decision support system for subsidized housing selection based on best-worst method and simple additive weighting,” Int. J. Adv. Trends Comput. Sci. Eng., vol. 9, no. 3, pp. 3384–3389, 2020.

[4] R. Gustriansyah, Ermatita, D. Palupi Rini, and R. Firsandaya Malik, “The Criteria That Have A Significant Effect on Forecasting the Number of Sales Using the Best-Worst Method,” in 2020 International Conference on Informatics, Multimedia, Cyber and Information System (ICIMCIS), 2020, pp. 236–241.

[5] R. Gustriansyah, Ermatita, D. P. Rini, and R. F. Malik, “Integration of Decision-Making Method and Data-Mining Method as A Preliminary Study of Novel Sales Forecasting Method,” Int. J. Adv. Trends Comput. Sci. Eng., vol. 9, no. 4, pp. 5730–5735, Aug. 2020.

[6] J. T. Simanullang, “Aplikasi Penilaian Karyawan Kontrak di BRI Menggunakan Metode AHP,” Universitas Mercu Buana, 2019.

[7] R. Gustriansyah, D. I. Sensuse, and A. Ramadhan, “Decision support system for inventory management in pharmacy using fuzzy analytic hierarchy process and sequential pattern analysis approach,” in 2015 3rd International Conference on New Media (CONMEDIA), 2015, pp. 1–6.

[8] S. Komariah Hildayanti et al., “Enterprise architecture framework selection for higher education using TOPSIS method,” Int. J. Eng. Technol., vol. 7, no. 4, pp. 5327–5330, 2018.

[9] N. Ainun, “Sistem Pendukung Keputusan Menentukan Perpanjangan Kontrak Karyawan Berdasarkan Penilaian Kinerja pada PT. Indomas Makmur Jaya Menggunakan Metode Vikor,” Pelilta Inform., vol. 8, no. 1, 2019.

[10] R. Gustriansyah, “Sistem Pendukung Keputusan Pemilihan Dosen Berprestasi dengan Metode ANP dan TOPSIS,” in Seminar Nasional Teknologi Informasi dan Komunikasi (SENTIKA), 2016, pp. 33–40.

[11] M. F. Bady, “Sistem Pendukung Keputusan Perpanjangan Kontrak Tenaga Kerja di PT. Metal Hitech Menggunakan Metode SAW,” Universitas Muhammadiyah Gresik, 2017.

[12] A. K. Ardilies, “Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Kontrak Menggunakan Metode Simple Additive Weighting,” Universitas Teknokrat Indonesia, 2019.

[13] N. Azizah, S. Rahayu, and N. Adhista, “Perancangan Sistem Informasi Penilaian Kinerja Karyawan SPG Berstatus Kontrak pada PT. Softex Indonesia Menggunakan Metode Simple Additive Weighting (SAW),” SENSI J., vol. 3, no. 2, pp. 182–189, Aug. 2017.

[14] A. Wibowo, “Sistem Pendukung Keputusan Perpanjangan Masa Kerja Karyawan Kontrak Menggunakan Metode Simple Additive Weighting,” Universitas Mercu Buana Yogyakarta, 2019.

[15] I. Permana, “Pengangkatan Karyawan Kontrak Menggunakan Metode Simple Additive Weight pada Sistem Informasi Manajemen Rekrutmen PT Surya Energi Indotama,” Universitas Komputer Indonesia, 2019.

[16] A. Mulyana, “Implementasi Sistem Pendukung Keputusan untuk Menentukan Status Karyawan Kontrak Menjadi Karyawan Tetap Menggunakan Metode Simple Additive Weigheting (SAW) Berbasis Web pada PT. Dominos Pizza,” Universitas Pamulang, 2017.

[17] P. Ayu, “Sistem Pendukung Keputusan dalam Penentuan Kelayakan Karyawan Kontrak Menjadi Karyawan Tetap pada PT. Inti Surya Menggunakan Metode Promethee,” Universitas Potensi Utama, 2019.

[18] D. Saripurna, J. Halim, and Z. Lubis, “Sistem pendukung Keputusan Dalam Menetukan Kelayakan Karyawan Kontrak Menjadi Status Karyawan Tetap PT. ISS Indonesia dengan menggunakan Metode Multi Attribute Utility Theory,” J. Teknol. Sist. Inf. dan Sist. Komput., vol. 1, no. 2, 2018.

[19] E. Prasetianto, “Sistem Pendukung Keputusan Perpanjangan Kontrak Tenaga Kerja Menggunakan Metode TOPSIS,” Universitas Muhammadiyah Gresik, 2016.

[20] N. S. Fitry, M. Suhaidi, and E. Alimudin, “Sistem Pendukung Keputusan Penentuan Karyawan Kontrak Menjadi Karyawan Tetap Menggunakan Metode TOPSIS pada PT. Murini Samsam II Pelintung,” Sekolah Tinggi Teknologi Dumai, 2017.

[21] R. Tenggara, “Perancangan Sistem Penentuan Keputusan Karyawan Kontrak Menjadi Karyawan Tetap Menggunakan Metode TOPSIS pada PT. Super Tata Raya Steel,” Universitas Buddhi Dharma, 2018.

[22] A. D. Kurniawan, “Sistem Pendukung Keputusan Seleksi Pengangkatan Karyawan Tetap dari Tenaga Kontrak di PT. Petrosida dengan Menggunakan Metode TOPSIS,” Universitas Muhammadiyah Gresik, 2016.

[23] L. Chairani, “Penerapan Sistem Pendukung Keputusan Rekomendasi Status Pengangkatan Karyawan Kontrak Menjadi Tetap Menggunakan Metode TOPSIS (Studi Kasus: Matahari Department Store Lampung) Berbasis Web,” Universitas Teknokrat Indonesi, 2018.

[24] F. Awai and L. Suryadi, “Pemilihan Karyawan Kontrak Menggunakan TOPSIS di TB. Gramedia Baywalk Pluit,” Indones. J. Inf. Syst., vol. 3, no. 1, pp. 526–531, 2020.

[25] H. Maulana and P. K. Wardani, “Sistem Rekomendasi Kelanjutan Kontrak Karyawan Menggunakan Metode TOPSIS,” MULTINETICS J. Multimed. Netw. Informatics, vol. 4, no. 1, pp. 14–20, 2018.

[26] Anharullah, “Sistem Pendukung Keputusan Pengangkatan Tenaga Kerja Kontrak Menjadi Karyawan Tetap Pada PDAM Tirta Tuah Benua Menggunakan Metode SMARTER Berbasis Web,” STMIK Widya Cipta Dharma, 2021.

[27] S. B. Yanto, “Sistem Pendukung Keputusan Karyawan Kontrak Menjadi Karyawan Tetap Berdasarkan Rekomendasi Manajer pada Otoritas Jasa Keuangan Regional 3 Jawa Tengah dan DIY Menggunakan Metode SMART,” Universitas Stikubank, 2020.

[28] E. B. S. F. Nugraha, “Sistem Pendukung Keputusan Untuk Menentukan Status Karyawan Kontrak Menjadi Karyawan Tetap Menggunakan Metode SMART,” J. Sist. Inf. dan Teknol. Inf., vol. 7, no. 2, 2018.

[29] O. Alfina and M. Safii, “Analisa Kontrak Kerja Karyawan pada Perusahaan Ritail Modern Menggunakan Metode SMART,” J. Manaj. Inform. dan Komputerisasi Akunt., vol. 3, no. 1, 2019.

[30] F. E. C. Ningrum, “Penilaian Kinerja Karyawan Kontrak Menggunakan Metode Rating Scale pada Personalia and General Affair Rumah Potong Ayam,” Universitas Brawijaya, 2018.

[31] A. N. Husna, “Penilaian Kinerja Karyawan Kontrak Departemen Fiber PT. Adiputro Wirasejati Menggunakan Metode Rating Scale,” Universitas Brawijaya, 2019.

[32] Guswantoro, “Sistem Penilaian Karyawan Kontrak Menjadi Karyawan Tetap Menggunakan Metode Electre,” Universitas Muhammadiyah Jember, 2018.

[33] R. Gustriansyah, N. Suhandi, and F. Antony, “The Design of UML-Based Sales Forecasting Application,” Int. J. Recent Technol. Eng., vol. 7, no. 6, pp. 1507–1511, 2019.

[34] A. Sanmorino, R. Gustriansyah, Terttiaavini, and Isabella, “The Toolkit of Success Rate Calculation of Broiler Harvest,” Telkomnika (Telecommunication, Comput. Electron. Control., vol. 15, no. 4, pp. 1952–1959, 2017.

[35] J. Rezaei, “Best-worst multi-criteria decision-making method: Some properties and a linear model,” Omega, vol. 64, pp. 126–130, Oct. 2016.

[36] J. Rezaei, T. Nispeling, J. Sarkis, and L. Tavasszy, “A supplier selection life cycle approach integrating traditional and environmental criteria using the best-worst method,” J. Clean. Prod., vol. 135, pp. 577–588, 2016.

[37] J. Rezaei, “Best-Worst Multi-Criteria Decision-Making Method,” Omega - Int. J. Manag. Sci., vol. 53, pp. 49–57, 2015.

[38] C. W. Churchman and R. L. Ackoff, “An Approximate Measure of Value,” J. Oper. Res. Soc. Am., vol. 2, no. 2, pp. 172–187, May 1954.

[39] K. Palczewski and W. Sałabun, “The fuzzy TOPSIS applications in the last decade,” Procedia Comput. Sci., vol. 159, pp. 2294–2303, 2019.

[40] C.-L. Hwang and K. Yoon, “Methods for multiple attribute decision making,” in Multiple attribute decision making, vol. 1, Springer-Verlag, 1981, pp. 58–191.


Full Text: PDF

DOI: 10.30595/juita.v9i2.11989

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2579-8901